Error: Indicates a device is not responding (due to hardware detection error).
Error:
Device is not responding.
Cause:
The automatic hardware detection process in Windows 95 Setup caused a device to stop working. This device failure is recorded by Setup in the file DETCRASH.LOG. Setup will run in 'Safe Recovery' mode and skip the action that caused the problem.
Solution:
Turn the computer off and then on. Re-run Setup in 'Safe Recovery' mode.
As a workaround for the device problem:
1) Turn off the computer.
2) Wait a few seconds.
3) Turn on the computer.
4) Re-run Windows 95 Setup. (Setup should run in 'Safe Recovery' mode automatically when it detects DETCRASH.LOG.)
NOTE: It may be worth re-running Setup two or three times. Each time Setup runs it skips over hardware detection steps it has taken on the previous failed attempts.
